Engineering notes
Practical notes from our team on metering, process analyzers, calibration, rotating equipment and automation.
-
01
Valve Actuator Selection: Electric, Pneumatic or Hydraulic, Fail-Safe and Sizing
How to choose between electric, pneumatic and hydraulic actuators, define fail-safe action, size torque with sensible margins and meet shutdown stroke times.
-
02
Temperature Measurement: RTD or Thermocouple, Thermowells and Transmitters
When to use an RTD or a thermocouple, why thermowells break and how to size them, what slows a temperature reading and which transmitter features are worth specifying.
-
03
How to Select a Pressure Transmitter: Range, Materials, Seals and Installation
Gauge, absolute or differential; how range and turndown affect accuracy; which wetted materials suit which service; and when remote seals beat impulse lines.
-
04
Safety Instrumented Systems and SIL: A Practical Guide to IEC 61511
What SIS, SIF and SIL mean, how the IEC 61511 lifecycle works, what really sets the achieved SIL and how proof testing keeps a shutdown system honest. -
05
Level Measurement Technologies Compared: Radar, Guided-Wave Radar, DP and Displacer
How radar, guided-wave radar, DP, displacer, magnetic and radiometric level measurement compare, and what to check for interface, installation and overfill protection. -
06
Hazardous Area Classification and Ex Equipment: Zones, Gas Groups and Protection Concepts
How zones, gas groups and temperature classes are set, how Ex d, Ex e, Ex i and Ex p compare, and what to check when installing and inspecting Ex equipment. -
07
Control Valve Selection and Sizing: A Practical Guide for Process Plants
Process data, Cv sizing, body styles, flow characteristics, actuators, positioners and severe service: what decides whether a control valve controls well. -
08
Fixed Gas Detection Systems: Sensor Selection, Placement and Testing
Sensor technologies, detector placement, alarm set points, voting and testing for fixed gas detection on oil, gas and petrochemical sites. -
09
Custody Transfer Metering and Prover Systems: A Complete Guide
A tenth of a percent of error at a custody transfer point can mean millions in disputed invoices. Here is how a metering station is built, which standards apply and… -
10
Analyzer Sampling System Design: 7 Principles for Reliable Measurement
An expensive analyzer is only as good as the sample that reaches it. Seven principles for a sampling system that delivers real process data.
Send us your datasheets, P&IDs or tender documents.
We review them and reply with a technical and commercial proposal.
info@iow.ir +98 21 2205 5712 Request a quote






