ABB ACS350 AC Frequency Inverter and simple Keypad for 11kW (15HP) 400V 3 Ph motor in VxF or Sensorless Vector control to 23.1A. Simple to set-up with 400V three phase input for a standard AC Induction motor.

R3 Size – 169mm Wide x 169mm Deep x 202mm high (plus cable clamp plate at 34mm) IP20 case.

Overload – 150% x 60seconds.
Speed Control Range – 0/500Hz.
Braking – To 50 Ohm minimum external resistor (not supplied) – use the ‘Which Resistor’ button on this page.

Features – Basic Keypad, 2 x Analogue Inputs, 5 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 1 x Relay Contact set.
Programmable from a pc via ‘Flashdrop’.

Input Current – 30.9A.
Input Voltage – 380 to 480V three phase +-10% at 50/60Hz.

Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below – 75mm.
Ventilation space at sides – 0mm (drives can be mounted side by side).
Heat Loss at max output – 35.4W.
Mounting onto symmetrical DIN rail or use the screw fixings for side or rear mounting.

Full part number is – ACS350-03E-23A1-4+J404